English
 |
ZHG-I
JIANGSU JINLING DRYER
84193990
| Quantity: | |
|---|---|
Product Description
This model has a simple structure. which is adopted from the first generation of domestic products. It is mainly used for the drying or cooling of the powder and granular materials that do not require a sealed environment. The machine is supported by a bearing structure at both ends. Two sets of bearing and Haval bearing seats are used in this case. Packing seal is generally applied. The reducer is side mounted or direct- connected. The design of the mixing shaft and the main body is farly simple.
◆Wet materials are put into jacket-heated containers in batches. In a vacuum state, a stirring device with a shoveling plate continuously stirs the materials for heating and evaporation, and a circulating flow is formed inside the container. After the water or solvent evaporates or after it is recovered, it will be discharged via vacuum pump.
◆This machine uses large -scale sandwich heating method, to increase the heat transfer area and thermal efficiency.
◆Different mixing structures can be applied. In cases of drying slurry, paste-like or sticky materials, further discussion is required.
◆Discharge valves can be designed diferently according to the specific requirements, in order to make the discharging process smoother. (This design is a patented product of Jinling.)
◆The special design of the mixing shaft and the paddle blades ensures the strength and concentricity of theshaft.
◆Depending on the requirements of the user, a medium can be added inside the shaft, or the machine can be eQuipped with a vibration device.
◆Depending on the materials, diferent flters and discharge valves can be applied.
◆The jacket is either semi-tubular or integral.
◆The heat source can be hot water, steam, or thermal oil.
◆Maintenance is easy and simple; cost is low; production cycle is short.
◆The sampling valve can be designed according to the requirements or our customers .
Pre-service
Act as a good adviser and assistant of clients to enable them get rich and generous returns on their investments.
1. Introduce the product to the customer in detail, answer the question raised by customer carefully;
2.Make plans for choice according to the needs and special requirements of users in different sectors;
Sale service
1. Ensure product with high quality and pre-commissioning before delivery;
2. Delivery on time;
3.Provide full set of documents meet customer’s requirements.
After-sale service
Provide considerate services to minimize clients’ worries.
1.Assist clients to prepare for the first construction scheme;
2.Install and debug the equipment;
3.Train the first-line operators;
4. Examine the equipment;
5.Take initiative to eliminate the troubles rapidly;
6.Provide technical support;
7.Establish long-term and friendly relationship.
Service commitment
1. Provide clients one-year warranty to make sure the machine work well;
2.We always keep certain inventory level of spare parts, which means the replacements can be sent to you
Jiangsu Jinling Drying Technology Co., Ltd. was founded in 2000, as an innovation-oriented enterprise specialized in advanced technology.We have over 30 years of experience in machine manufacturing. We have achieved more than fifty national level patents and ten provincial level certificates for new high-tech products. There are more than 120 employees in our factory, Jinling is professionally engaged in designing, manufacturing over 30 series of drying equipment, environmental protection equipment, evaporation & concentration equipment and dry granulation equipment which are widely used for environmental protection field, chemical field, food field, national defense field etc.
Jinling is the qualified manufacturer of special pressure vessel, established the biggest drying & granulating testcenter in China, and passed the examination of ISO 9001, ISO 14001, OHSAS18001 and CE certification.Jinling's equipment has been spread all over China and has been exported to over 40 countries.
1. Q: Jiangsu Jinling Drying Technology Co., Ltd is a manufacturer, trading company or a third party?
A: We are a manufacturer, Our company established in 2000.
2. Q: Where is your factory located?
A: Jinling is located in Changzhou city, Jiansu province, China. it is In the middle of Shanghai and Nanjing.
3. Q: How can I go to your factory?
A: You can fly to shanghai Pudong or Hongqiao international airport directly, then take the high speed train to Changzhou station (just 1 hour from Shanghai to Changzhou by train) and we arrange to pick you up at Changzhou station to go to our company. Yutong company is around 30km away from Changzhou station.
If you are in China now, you can fly to Changzhou Benniu airport, or take train or bus to Changzhou city directly .
We sincerely welcome to visit our company at any time.
https://www.alibaba.com/product-detail/Vacuum-Paddle-Dryer-for-Food_1601396028057.html?spm=a2747.product_manager.0.0.75ce71d2PMbJFp
